Test Bench To Detect Hysteresis on Clutch Disc Assembly ( vertical-servo)
Main Features
* It mainly consists of basic machine , pneumatic-to-hydraulic system, measuring system and servo control system.
* Adopting
pneumatic-to-hydraulic cylinder up working table loading to press out disc assembly, and that amount of
clamp load can be obtained by load cell. Adopting torque servo motor under working table can apply positive or
negative torque to disc assembly, and that torque 
transducer is used to test torque value, given rotate angle can
be measured by photoelectricity encoder.* Precise guide loading mechanism.
* Pre-torsion times can be set
* Torsional speed can be set
* Windows operation system, data base function, high accuracy measuring card.
* All measuring results can be stored for query, and its curve displayed on the screen, and to print on A4 paper if
need.
Testing Items
* Limiting torque Mmax
* Limiting rotation angle θmax
* Torque hysteresis value Mh in given rotation angle (six points at the most)
* Torsion stiffness Ca in the range of given rotation angle (each three grade in positive or negative position)
* Torque inflexion
* Torsion characteristic curve
Technical Data
|
Product type
|
|
ZL-CNZ240LS
|
ZL-CNZ330LS
|
ZL-CNZ430LS
|
ZL-CNZ430LST
|
|
Range of disc assembly
|
mm
|
φ160-φ240
|
φ240-φ330
|
φ330-φ430
|
φ180-φ430
|
|
Max. torque
|
N·m
|
500
|
1000
|
3000
|
3000
|
|
Max. clamp load
|
kN
|
10
|
15
|
30
|
40
|
|
Torsion angle
|
°
|
±35
|
±35
|
±35
|
±35
|
|
Measuring accuracy of torque transducer
|
% FS
|
±0.5
|
±0.5
|
±0.5
|
±0.5
|
|
Indication value for angle measuring
|
°
|
±0.025
|
±0.025
|
±0.025
|
±0.025
|
|
Measuring time
|
s
|
＜90
|
＜90
|
＜90
|
＜90
|
|
Dimension(L×W×H)
|
mm
|
1200×700×2300
|
1200×700×2300
|
1200×700×2300
|
1200×700×2300
|
|
Weight (gross)
|
kg
|
1500
|
1500
|
1500
|
1500
|
